Is there anyway to align the data boxes with the correct player besides the manual way. Starting 3 MTT's and then table switches it screwed up my game because I was busy setting things up. The boxes are like the opposite across the table not even close to the correct player, sometimes it is one off for everyone. Also can the boxes get smaller with white on black font?
playinggameswithu said:
You just need to configure your seating correctly. You likely have preferred seating turned on at the poker site, and not in drivehud. This is something that once configured correctly, you will always have your HUD over the correct players.
http://drivehud.com/blog/knowledgebase/how-do-i-setup-preferred-seating/
As far as HUD box sizes, you can re-size to anything, change font etc.. you can't flop and make the HUD box white though.
Ahoy said:
Yes, it will track observed tables.
We don't have any HUD converter yet. It's definitely on our list. There's a lot of really good out of the box HUD options though, and also more free ones in the HUD store in Drivehud.
I downloaded trial version of Drivehud. Tried using it on ACR tourney (9 player). Stats layout are nor properly aligned. Some cards are covered partly. I tried to use different layouts that came out of the box but change didn't apply. Am I doing something wrong or I have to create something on my own?
hookmeout said:
You have preferred seating set on ACR, and not on Drivehud. You just need to set it. If a layout is covering something, you can just move the HUD position and save it by clicking on the drivehud logo at the top of the page.
Preferred seating:
http://drivehud.com/blog/knowledgebase/how-do-i-setup-preferred-seating/
Re-position HUD:
http://drivehud.com/blog/knowledgebase/how-do-i-re-position-my-hud-at-the-table/
DriveHUD BETA release update – v1.6.0.2625
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2625.exe
- Fixed the issue when heat maps attached to popup stats had no data
- Fixed the issue when Hero's heat maps had no data
- Fixed the issue in WPN Jackpot buy-in detection
- Fixed the issue when stake filter wasn't available in some cases
- Fixed the issue when Adda52 hands weren't imported
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2625.exe
- Fixed the issue when heat maps attached to popup stats had no data
- Fixed the issue when Hero's heat maps had no data
- Fixed the issue in WPN Jackpot buy-in detection
- Fixed the issue when stake filter wasn't available in some cases
- Fixed the issue when Adda52 hands weren't imported
Feel as if hands sit out should not be counted as it skews the playing profile. Guy who sits out 40 hands because he is watching netflix should not have nit stats. Can DriveHUD load quicker because each hand is make or break and when I get table changed 2 ACR it takes several hands for refresh.John A said:
What is the minimum hands needed for stats to give you a accurate idea on each stat...like 169 hands?
Last edited:
playinggameswithu said:
That's pretty much the opposite of what we hear from the poker community actually.
HUD will load as soon as 1 complete hand is played. If you get moved to a table, you're usually in the middle of a hand, and then once a full hand is played, the HUD is loaded instantly.
As far as removing the HUD for a table, you can just drag it off table.
DriveHUD BETA release update – v1.6.0.2634
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2634.exe
- Fixed the issues in Fold to 3-Bet in EP/MP/CO/BTN vs SB (rebuild is required)
- Fixed the issues in hero/opponent position filters
- The width of table on HUD tab is based on screen resolution.
- Fixed the issue in preferred seating settings (in some rare cases it applied -1 even if setting wasn't set)
- Fixed multiple issues in DHEQ
- Added possibility to select FC/C/VB/bluff for each combo in DHEQ
- Auto-range in DHEQ will select FC/C/VB/Bluff for each combo
New visual map of mixed ranges displayed now in DrivehudEQ as well:
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2634.exe
- Fixed the issues in Fold to 3-Bet in EP/MP/CO/BTN vs SB (rebuild is required)
- Fixed the issues in hero/opponent position filters
- The width of table on HUD tab is based on screen resolution.
- Fixed the issue in preferred seating settings (in some rare cases it applied -1 even if setting wasn't set)
- Fixed multiple issues in DHEQ
- Added possibility to select FC/C/VB/bluff for each combo in DHEQ
- Auto-range in DHEQ will select FC/C/VB/Bluff for each combo
New visual map of mixed ranges displayed now in DrivehudEQ as well:
DriveHUD BETA release update – v1.6.0.2643
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2643.exe
- Fix for PokerKing update
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.0.2643.exe
- Fix for PokerKing update
DriveHUD BETA release update – v1.6.0.2692
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.1.2692.exe
- Added Export for 3rd party Apps function
- Fixed short deck equity in replayer
- Adjusted bb/100 graph
- Fixed performance issue in bb/100 graph
- Fixed PK short deck position issues (rebuild is required)
- Fixed Cold Call 3/4-Bet stats
- Fixed Limp Re-Raise column in report
- Fixed 4-Bet vs Blind 3-Bet column in report
- Fixed Check River on BX Line stat
- Fixed issue when players between and stake filter might not work if all 6-max or all full-ring position are selected
- Added Call 3-Bet stats
- Improved performance
- Fixed the issue when BOL table isn't detected if process name is different from GameClient
- Fixed PB issue when table wasn't detected if its name has extra spaces at the end
- Fixed the issue when DH doesn't detect PK table sometime
- Added missing Check/fold flop when 3-betting OOP and Check/fold flop when PFR OOP to the dashboard
http://drivehud.com/poker-hud/DriveHUD-install_v1.6.1.2692.exe
- Added Export for 3rd party Apps function
- Fixed short deck equity in replayer
- Adjusted bb/100 graph
- Fixed performance issue in bb/100 graph
- Fixed PK short deck position issues (rebuild is required)
- Fixed Cold Call 3/4-Bet stats
- Fixed Limp Re-Raise column in report
- Fixed 4-Bet vs Blind 3-Bet column in report
- Fixed Check River on BX Line stat
- Fixed issue when players between and stake filter might not work if all 6-max or all full-ring position are selected
- Added Call 3-Bet stats
- Improved performance
- Fixed the issue when BOL table isn't detected if process name is different from GameClient
- Fixed PB issue when table wasn't detected if its name has extra spaces at the end
- Fixed the issue when DH doesn't detect PK table sometime
- Added missing Check/fold flop when 3-betting OOP and Check/fold flop when PFR OOP to the dashboard
Hey John!
I tried your DriveHud some time ago and I think I like it.
I still didnt buy any tracking software and I about to buy one, strongly deciding between driveHud and PT4. What I like about your HUD is that it tracks betOnline but I dont like the yearly payments so much. But afterall, its not so much if support works and software keeps getting better - I understand how this model works and I definitely see why it is like that (and I think its for the better part).
can I ask if there is some (even a small one) discount for CC players? 😛 I would use it immediately!
TY!
I tried your DriveHud some time ago and I think I like it.
I still didnt buy any tracking software and I about to buy one, strongly deciding between driveHud and PT4. What I like about your HUD is that it tracks betOnline but I dont like the yearly payments so much. But afterall, its not so much if support works and software keeps getting better - I understand how this model works and I definitely see why it is like that (and I think its for the better part).
can I ask if there is some (even a small one) discount for CC players? 😛 I would use it immediately!
TY!
Hey John, sorry for the vast amount of questions. I read FAQ and I can see that I acn use my basic license with 2 computers, which is cool. My question is, when I have 2 computers, how hard is it to sync the 2 databases? I will need this for sure. I assume there is not an built in option to do so, but I guess it should be possible? Thanks!
Ahoy said:
You won't be sorry in terms of what you're getting for the price. As far as yearly, it's clear on the site that it's only $5-$10/mo yearly correct? I think any software model for developers right now, that offers one flat cost for life is suicide. That's why most development companies are going to monthly fees. We tried to split the middle. And in the case of our field, poker site, they constantly update, change, etc... it's ongoing development costs just to keep up with site changes alone, not counting the fact you want to implement new features. It's just not a smart model anymore in today's climate to only charge one price, then be expected to support that product for 10+ years.
As far as syncing databases, there's no direct merge. We do have on our roadmap a faux cloud solution we're going to do. For now you can right click on the overall report in drivehud, and select export to 3rd party App, then just copy those data files it want to your other drivehud and import them.
PM on your other question.